Showing posts with label extractors. Show all posts
Showing posts with label extractors. Show all posts

Sunday, April 7, 2019

How To Replace The Extractors On A Mossberg 835 Ulti-Mag



"So, LSP, if that's your real name which we doubt, how do you replace the extractors on a Mossberg 835 Ulti-Mag 12 gauge?" Good question, punters.  First things first, you put the beast on a Led Sled and take a photo with your not-so-smart phone. Beautiful, isn't it.

Then you reminisce about all the armed strolls through the country, dove down, skeet smoked, rabbits for the pot, ducks missed and general pump action shotgunnery. Good times, no doubt about it.






But here's the thing, it may be a deadly assault shotgun but only if the extractors work and the gun cycles ammo. Then it's banned in dhimmitudes like New Zealand, Great Britain, Australia and beyond. In those countries only criminals can own guns, so law abiding citizens are safer.

Reverie over you move to the task in hand, changing out the 20 year old (?) extractors and their dualist, Manichean springs. How? It's not hard, take down the weapon, behold the bolt, place it on two blocks of wood and tap out the pins which hold the extractors and springs in place. Then replace. Easy, right?





No, not easy, because the pins are held in place by dark Zeroastrian magicke, Pangea, typical. First you take a pin punch to the thing, tap, tap, tap; tap out the pin, LSP. Fail. The pins don't want to move because they're wedded to staying deep within the Solar Disc of the bolt.

Don't give up like some kind of RINO, fight through to the objective. For me, that meant moving the lubed up bolt to  a vise. Resist, Ulti-Mag enthusiasts, the urge to pound the bolt with a hammer. Instead, take a sturdier punch to the task and tap again, the pin should move. Follow through with a lighter gauge punch equivalent.





Retaining pins driven out of communion, replace the worn out qabbalists with new parts. It's easy enough, pop in the springs and extractors, hold the extractors in place with a retaining punch and tap in the pins. Do it in a vise, if you're me. 

Please don't freak out and pound on the immobile pins with a sledgehammer, that'll mess up the job. Stay calm and while you're at it it, remove and clean the bolt lock. You don't have to, there's no "rule," but I recommend it.





Then sit back and behold the glory of the thing. Two new extractors in an old bolt and a gun restored to fight again for another couple of decades. Right on, and you did it yourself as opposed to paying someone at Ray's to rip you off $200.

The Mossberg 835 Ulti-Mag began life in 1988 as an all-purpose shotgun, capable of handling small to big loads, 2 1/4-3 1/2". It retails at around $600, mine cost $200 from a gun show a decade ago, and features a ported barrel, tang safety and over-bored barrel (don't try slugs, kids). It's been a workhorse and worth every penny.





Buy one if you like, but be sure to spray the unpleasant camo on the new guns black. Better yet, go to a gun show and buy one at the right price.

Your Pal,

LSP