Maundy Thursday

Tonight we celebrate the Institution of the Eucharist at the Last Supper and we watch before the Sacrament as Christ's disciples were asked to watch with Our Lord while he prayed in the garden before His betrayal by Judas. I like this short meditation and prayer by Marianne Dorman.

"On this most holy night, let give me sincere thankfulness for the Blessed Sacrament which fills me with Your life each day, and may I always come to the Altar prepared to receive Love, and take Love out into the world. 

As I watch with You during the silent hours of this night let Your sufferings and grief penetrate to my inner self, so I can share something of what You endured for me and all mankind, what Deitrich Bonhoeffer called ‘costly grace’. I adore You O Christ, and bless You, because by Your cross You have redeemed the world. Amen."

Being a mission priest, I had two Masses this evening, separated by a drive, which meant refueling the truck. By way of conversation I asked the cashier where he was from. "Nepal," he said and I replied, "Gurkha!" 

gurkha

At which he started running on the spot while making great chopping movements with his right hand, in imitation of his knife wielding countrymen.

We saluted each other smartly and went about our business. It's all going on in the countryside, I tell you.

Every blessing for the Triduum.

LSP

Sporterizing the Lee Enfield - Porch Project Pt. VI

I've been told, by a notable outdoor blogger, that the recent spate of tornadoes were caused by my "boss" being angry at me for running off to the range instead of focusing on the Lee porch project. Rather than risk the wrath of God and his messenger, I applied grit to metal.

The bolt looked nasty, covered in chipped black paint and generally dinged about, but that was soon fixed by steady application of 150 - 600 grit, followed by burgers on the grill and some company around the rarely used dining table.

clamp 'n vise

Bolt seen to, it was back to the barreled receiver. The barrel had been polished to 400 grit and had to advance to 600 in order to achieve a uniform finish with the receiver and newly shiny bolt. Wouldn't want the thing to appear two-tone, for goodness sake.

shine

So I rigged up a small vise and clamp arrangement on the porch and got to work, which wasn't easy because half the congregation took the opportunity to swing by and visit. But I like that; far better than skulking away in an office pretending to be an "administrator". No danger of that when you're polishing gunmetal -- on the porch. You'd be surprised at how much pastoral work gets done that way instead of gazing numbly at a monitor. You can pray, too.

In a fit of enthusiasm, read the book, I decided to bite the proverbial bullet and polish the whole business to 1000 grit. I thought it looked good, shining like a light saber in the sun. 

Next step? Refinish the trigger guard, attach new front and rear sights (tempted by a 2 leaf express) and blue. In the meanwhile, order some wood and finish the nearly done butt stock.

God bless,

LSP

Used Scopes

I like iron sights and, for the most part, that's what I use when I shoot. Still, I'm always on the look out for affordable optics, so I was pleased when a local gun shop gave me a couple of used scopes to try out. A Burris Fullfield II 3x9x40 and an old Universal 4x32; if I liked them and they worked -- $50. If not, return them and no harm done.

Burris

I mounted the glassware up on the AR to dial in and test, getting on paper from 25 yards. At first the Universal did well, grouping nice and tight but a few inches to the left of point of aim. No problem, adjust windage right by the relevant amount, get nicely on target then pull back to zero in at 50 yards. Easy, isn't it? Think again.

60 frustrated rounds and a significant amount of tape and Sharpie later, I discovered that this piece of Japanese rubbish wasn't going to work. Off with the "scope", flip up the Magpul back-up and unload a couple magazines at a steel plate turkey. Turkey down, I headed for home.

wrath of God

The next day it was time to test out Reverend Burris. The Fullfield did just fine; on paper quickly and zeroed at 100 yards. Why at 100? Because that's pretty much the maximum length of the range and I was just messing about to see if it worked. I won't trouble you with the ballistics of 5.56 ammo and don't intend to use the scope for that anyway, it'll probably go on one of the Lees to be sighted in again for the venerable .303. The Burris Fullfield's a decent bit of kit, clear and powerful enough for me and it's inexpensive new, even more so second hand.

Moral of the story? Don't scorn used optics but test them first to see if they work, you can save a lot of money. Also, steel plate turkeys are fun to blast down at 75 yards with semi-auto carbines.

stormchaser

Drove home along the edge of a tornado. The wrath of God was waxing strong against the fleshpots of Dallas, but the country just got a well needed drenching of lightning, gale force winds and rain.

God bless,

LSP

Dog & Gun

You know what it's like, serious Palm Sunday business, a bit of porch 'smithing, and then? Fire up the grill, cook some burgers and relax.

Vizsla

JEB's happy. He's a bird dog; that's the theory. Somehow a rifle makes its way onto the mahogany and look! There's a No. 4!

Empire Builder

Nice.

God bless,

LSP

Palm Sunday

A tremendous turn out at the Masses this morning. Enfield enthusiam is obviously paying off. B16 tells us that Confession is key to the new evangelism. I must make mine.

Anyway, here's the Collect of the day.

ALMIGHTY and everlasting God, who of thy tender love towards mankind, hast sent thy Son, our Saviour Jesus Christ, to take upon him our flesh, and to suffer death upon the cross, that all mankind should follow the example of his great humility; Mercifully grant, that we may both follow the example of his patience, and also be made partakers of his resurrection; through the same Jesus Christ our Lord.Amen. 

Have a blessed Holy Week.

LSP

Sporterizing the Lee Enfield - Porch Project Pt. V

You know what it's like in the mission field, drive several hundred miles to say Mass and teach a Confirmation class full of inquiring minds. "Tell me, class. Just what is a Sacrament? And why do we have them?" They did well and we'll have more Confirmations at this one Mission than we've had in a decade. Result.

nearly there

Still, class over and it's time to fall back to the LSP Compound to get on with serious Gospel imperatives, namely sorting out one of the Lees -- on the porch.

porch vise

First things first, apply another coat of finish to the butt and notice that almost all of the grain is full. This is not a job for the impatient. Just sayin'. Woodwork done, stand it up somewhere to cure.

But that's not all, not by any means. The barrel of the Lee demands polishing. Get down to it, starting with 150 grit and moving up to 400. Use a block, sand along the barrel, then across the barrel, as if you were buffing shoes.

stamper

Give the receiver another going over with 600 grit and notice the cacophany of stampings. I especially like the Crown and BSA & Co marks. 1917 puts me in a somber mood; who knows what hells this rifle and its rifleman went through. 

Imperium

Ma LSP says, "Maybe it shot some bulletheads." She doesn't waste words. A Texan. Several hours later the job was done. Barrel sanded to 400; in the next installment I'll bring it up to 600 to match the receiver.

elbow grease

Maybe it's time to turn to the bolt... Have a blessed Palm Sunday.

All glory, laud and honour.

LSP

Huge Hat Small Gun

some fool with a hat

Sometimes extremely large hats seem to go together with smallish guns... but I just got back from a preaching engagement in Dallas. The theme? The two thieves who were crucified alongside Our Lord. They serve as types of sinful humanity and were bad outlaws, which is why they were crucified. One repents, so there's hope for us all.

When I was invited to speak at this Lenten series and told that the theme was on various aspects of the Stations, I said, "Sure, I'll talk on the thieves." The Senior Warden looked at me and said, "I thought you would."

I find that vaguely unsettling.

God bless,

LSP

Sporterizing the Lee Enfield - Porch Project Pt. IV

After removing most of the unpleasant black paint from the barreled action, the obsessive madman avid Lee Enfield enthusiast ponders the best way to prepare the metal for bluing -- on the porch. There's several options; use a wheel and various polishing compounds, or do it by hand. I wisely didn't trust myself with a wheel for fear of cutting into the metal and ruining the job, so by hand it was.

get on with the sanding, for goodness sake

The objective here is to sand the metal using progressively finer grit until you get the look you want. This is the finish that will appear through the blue. I started with 180 grit and worked up to 600, producing a mirrorlike, scratchless, even sheen.

Be careful around straight edges, screw holes and stampings. Use sanding blocks to keep the surface even; I found small, old, cut to size kitchen sponge worked pretty well -- it can be formed and holds its shape, which is useful for sanding around the receiver. Don't forget in a fit of squaddie-like enthusiasm to keep a light touch, otherwise you'll mess things up. 

non satis

A lot of elbow grease and patience later, the receiver was looking acceptable. There was some pitting, understandable in a rifle that's nearly a hundred years old, but I can live with that as it's mostly below the stockline and won't be seen. If you're keen you can file the pitting out and blend the hole in to the rest of the surface. I didn't think that was necessary for this old warhorse.

better

Word to the wise. Be careful with the III safety catch; it's easy to remove and polish up but be sure it works when you reassemble and install -- work the bolt to ensure the action's smooth and if it is you've got it right. If not... don't try to brute force the bolt, take out the safety mechanism and start again, making sure its moving parts are in the correct position.

Then spray the beast with oil and admire your handiwork.

better still

Next step? More polishing.

Patience is a virtue. You can pray while you sand.

LSP

Sporterizing the Lee Enfield - Porch Project Pt. III

The thing about finishing the furniture of your rifle is that it takes time, a day or more between each application of oil/varnish, so that the finish has time to dry and cure. This means you have plenty of hours to start work on the metal. So don't be a slacker, get down to it.

sights off, stripper on

First things first, you gaze at the barreled action, wondering why the British Army in its infinite wisdom decided to coat the venerable III in some kind of thick, baked on, matte black paint.

get the paint off, LSP

After removing front and rear sights (tap out the holding pins) you brush on noxious K3 and wait for the stripper to work its magic. Ten minutes later you take plastic scraper to paint and wonder why so little of it comes off. After three or four goes at this you think, "This is incredibly annoying. Maybe I'd better use something stronger." A trip to Walmart and a can of Aircraft Remover later, you're there on the porch spraying and stripping. Use gloves, eye protection and avoid flame. The stuff explodes, apparently, like a bomb.

some kind of bomb

After an hour or so the paint's off, helped on its way by scraper and fine steel wool, revealing a somewhat pitted receiver and a decent enough looking barrel.

barrel

Next step? Polish the metal to prepare it for bluing.

Train Hard. Think Positive. Fight Easy.

LSP

Sporterizing the Lee Enfield - Porch project Pt. II

nasty old rubbish

You've got your Lee. It's been "bubba'd" and you want to turn it into something nice, so you set-to on the porch and...

Sand the wood to 600 grit, but first strip off the gunky finish; I used K3 with a flexible plastic scraper and 0000 steel wool. Don't gouge the wood, for goodness sake, and make sure you sand with the grain.Then clean with mineral spirits, let dry, and apply the first coats of finish to seal the wood (x3 for me). Wipe on/off as per instructions.

Then fill the grain and build a finish by wet sanding with progressively higher grit (180 - 600++). Cut 1"x1.5" paper and use a block (I used a cut down old dish sponge -- flexible, some recommend a rubber eraser) to keep things even. Sand in small circles, using a thinned finish (I used Minwax Antique Oil Finish and Mineral Spirits, 1:2) until the finish becomes a little tacky and begins to take. Anyone familiar with "bulling" things will understand this instinctively. We used to "bull" our gasmasks till they shone like glass. Same idea, but more useful. See here for instructions.

what's with the Spyderco?

Anyway, when there's a sufficient slurry of oil/varnish and wood dust, wipe it gently counter-grain, just using the weight of a lint free cloth. This will fill the grain and make for  a respectable finish. Please, do not use steel wool in the process. It's a right mess and better off on pots 'n pans. Rottenstone/Flatstones? Knock yourselves out, but this is a quick truck gun fix -- if your truck's an Aston Martin and the Fix is some kind of Edwardian Tomfoolery. 

sandman

Leave the partially bulled wood to cure for a day or so and repeat the process till the grain is filled. Leave for a couple of days, buff up with hi-power polishing compound and there you go. I'm nearly at the end of the "fill the grain" bit.

getting there

Do not attempt any of this if you do not like sanding and/or have a heavy, clumsy, heretical hand. Do something else instead, like read Drudge, or ZeroHedge. Or...

You can work on the metal.

Good luck and God bless,

LSP

Sporterizing the Lee Enfield - Porch Project Pt. I

I had a choice. Buy a plastic stocked sporting rifle for around $400-500 or buy a sporterized Lee Enfield for $150, fix it up and have some decent wood and steel with Empire History. Your pal and mine, the Suburban Bushwacker, told me that I was "required by law" to go Empire and so I did. Several weeks later I had two sporters, a No. 4 and a Mk. III, both in the price range and crying out for further enhancement. For me, that means using the Lee Speed as a template; at least for the III, which is a Speed action.

Lee Speed

What next? I started work on the III. The objective being to practice finishing/refinishing the furniture (gun stock) before buying a new stock -- and preparing the metal prior to bluing. Why? Because I can't afford hundreds of dollars to send the thing off to Turnbulls for the blue and a thousand dollars for the custom stock. No. I have to save those $$ for a 4x4 pickup. So, I figured I'd do it myself and here it goes, first things first, by way of the porch.

Here's the III.

Mk. III

It's a BSA from 1917, factory refurbed in '31 and '53. Bore's bright, serials match and it's covered with thick black baked on paint. The stock's a mix of Walnut (butt) and something else at the forend.

what a filthy gopping mess

Cheaper than a handy set of double soled Veldtshoen (by far) and obviously ready for porch re-sporterization.

Say your prayers,

LSP

Don't Mess With Texas

Some people have this idea that Texas is sort of backward, because it's not like France, or Brussels, or Dalston, or something. That's ridiculous, we're an advanced country.

benchmarking to best practice

We have software.

workflow

We have hardware.

Sometimes the two go together for awesome effect. Apologies to The Fact Compiler.

God bless,

LSP