Sporterizing the Lee Enfield - Porch Project Pt. VI

I've been told, by a notable outdoor blogger, that the recent spate of tornadoes were caused by my "boss" being angry at me for running off to the range instead of focusing on the Lee porch project. Rather than risk the wrath of God and his messenger, I applied grit to metal.

The bolt looked nasty, covered in chipped black paint and generally dinged about, but that was soon fixed by steady application of 150 - 600 grit, followed by burgers on the grill and some company around the rarely used dining table.

clamp 'n vise

Bolt seen to, it was back to the barreled receiver. The barrel had been polished to 400 grit and had to advance to 600 in order to achieve a uniform finish with the receiver and newly shiny bolt. Wouldn't want the thing to appear two-tone, for goodness sake.

shine

So I rigged up a small vise and clamp arrangement on the porch and got to work, which wasn't easy because half the congregation took the opportunity to swing by and visit. But I like that; far better than skulking away in an office pretending to be an "administrator". No danger of that when you're polishing gunmetal -- on the porch. You'd be surprised at how much pastoral work gets done that way instead of gazing numbly at a monitor. You can pray, too.

In a fit of enthusiasm, read the book, I decided to bite the proverbial bullet and polish the whole business to 1000 grit. I thought it looked good, shining like a light saber in the sun. 

Next step? Refinish the trigger guard, attach new front and rear sights (tempted by a 2 leaf express) and blue. In the meanwhile, order some wood and finish the nearly done butt stock.

God bless,

LSP

Sporterizing the Lee Enfield - Porch Project Pt. III

The thing about finishing the furniture of your rifle is that it takes time, a day or more between each application of oil/varnish, so that the finish has time to dry and cure. This means you have plenty of hours to start work on the metal. So don't be a slacker, get down to it.

sights off, stripper on

First things first, you gaze at the barreled action, wondering why the British Army in its infinite wisdom decided to coat the venerable III in some kind of thick, baked on, matte black paint.

get the paint off, LSP

After removing front and rear sights (tap out the holding pins) you brush on noxious K3 and wait for the stripper to work its magic. Ten minutes later you take plastic scraper to paint and wonder why so little of it comes off. After three or four goes at this you think, "This is incredibly annoying. Maybe I'd better use something stronger." A trip to Walmart and a can of Aircraft Remover later, you're there on the porch spraying and stripping. Use gloves, eye protection and avoid flame. The stuff explodes, apparently, like a bomb.

some kind of bomb

After an hour or so the paint's off, helped on its way by scraper and fine steel wool, revealing a somewhat pitted receiver and a decent enough looking barrel.

barrel

Next step? Polish the metal to prepare it for bluing.

Train Hard. Think Positive. Fight Easy.

LSP