KYLE ACQUITTED

 

Kyle Rittenhouse, popularly known as the Kenosha Kid, was acquitted on all charges today. Turns out it's not illegal to defend yourself against felons, pedos, and wife beaters in Kenosha. 

And we have to ask, who or what were paying these goons to set fire to this flyover Wisconsin town. Don't say Democrats. Someone once said, "In '68 they went full riot and Democrat civic authority stopped it, but not today, they encourage it."

Exactly, to the point where kids with rifles are out there protecting businesses from Bolshevik nihilists. But not just any Bolshevik nihilists, these people are corporate sponsored, media darlings.

Unlike Kyle, who, I hope, sues them into oblivion. Speaking of money, how much ca$h has BLM put into black neighborhoods? You know, 'coz Black Lives Matter so much. Would that be... none? Beachfront mansions all 'round.

In the meanwhile, Kyle walks, what a great result. I wasn't show trial expecting it.

Your Respectful Friend,

LSP

Sandman - Fixing up a Lee

If you see a sportered Lee Enfield No. 1 Mk. III, with a decent bore, matching serials and good looking BSA stamp (1917), all for the price of a cheap pair of shoes... well, you buy it, of course. Then you stare at it for awhile and like a child fascinated by the workings of a watch, take it apart.

tools of the trade

The metal was covered with a thick coat of baked on black paint from a 1951 refurb and the wood was covered in some kind of badly applied finish; I'd guess gloopily applied linseed oil. After removing the paint  with a mixture of K3 Stripper, Aircraft Remover, a plastic scraper and fine grade steel wool, I turned my attention to the wood.

stripper

First you strip off the old finish. I used K3 and it's easy to use, in a noxious kind of way. Brush on the stripper and let it work its chemical magic for around 10 minutes. Then scrape off the finish with a flexible plastic scraper. Use gloves, work with the grain, don't gouge the wood. Repeat, then repeat again, this time using steel wool. After several goes the old finish is off. Clean the wood with mineral spirits and enjoy the look of the thing; you'll have a glimpse of how it'll appear when it's refinished. Then...

You sand, and sand, and sand, and sand.

in between sanding -- use a tack cloth

I started with 180 grit and worked up through 600. Use a sanding block or your work will be uneven (some suggest a rectangular rubber eraser -- I used an old dish sponge I'd cut down to size). Be careful around stampings and sharp lines. Clean the wood between sandings with a tack cloth.

Some time later the wood will done. Clean it off with mineral spirits and congratulate yourself on the sheer patience of the thing; the stock is now ready for finishing.

Don't attempt this if you are an impatient, nervous, erratic person who doesn't like sanding. 

Also, don't lose sight of your Lenten rule, whatever that may be.

LSP