 |
Worked on the Mk. III forestock today; there was no shortage of wood to bring true to the metal. I used a rasp for that and it wasn't a difficult job, though you have to be careful. As with all these things, patience is definitely a virtue.
 |
| look at all that wood |
After an hour or so (I was being careful), the stock fitted flush with the trigger guard and receiver ring and the wood around the barrel channel was shaped.
 |
| clamp and rasp |
Then it was time to sand. I started with 150 grit and worked up through 220, 240, 320, 400 and finally 600 grit. I used an old dry dish sponge as a block and kept the sawdust. Why? To mix with the finish when the time comes to fill the grain; I'm cunningly thinking that this might save some time and effort. We'll see.
 |
| getting there |
I put the old warhorse together and was pleased with the result, it was good to see the rifle progressing. Next step is staining the forestock to match the butt (I'm tempted to keep the military original for now) and apply the finish. Then it'll be time to glass bed the barreled receiver, blue the metal and get a smith to attach iron sights, perhaps a 2/3 leaf express, and crown the barrel.
But that will have to wait till after The Episcopal Church's (TEC) General Convention in Indianapolis which, Enfield enthusiasts, is another story altogether.
Shoot straight,
LSP
